Primera FX500E, User Manual

Page: 24 / 40

20
Printing
C. SEALING LABELS WITH CLEAR FILM
Clear film is also available for FX500e. It lets you produce labels
with a high degree of resistance to water, chemicals, cleaning solu-
tions, UV and other harsh environmental factors
1. Load a clear film ribbon. For instructions see Section 2E.
2. Create a "Blank Template" in the Label Setup Wizard. Follow the
steps in Section 3A 2-11.
3. Click the Rectangle Button, then click on a corner of the label
and pull the rectangle to the other corner of the label. Then dou-
ble click on the rectangle and select black color under "Fill
Properties". Make sure the whole label is completely covered.
4. You are now ready to print your label. Click File - Print -
Document Properties to adjust darkness, speed etc. See Section
3D for more information. Click File then Print from the main
menu. Choose your number of copies and click OK.
D. PRINTER DRIVER SETTINGS
Once the printer driver has been successfully installed, you will
need to setup the driver with the appropriate print options. Refer to
the following steps to change or verify your default printer driver
preferences. These settings will apply to all new designs created in
BarTender, NiceLabel or other programs after the preferences were
changed. Existing labels saved in BarTender or NiceLabel will not be
affected since the preferences are saved with the label. To change
these preferences you will have to change printer preferences
through BarTender or NiceLabel. (File Menu - Printer Settings).
To find Driver Settings:
Click the Start button, choose Printers and Faxes. Right-click on the
FX500e Icon and select Printing Preferences from the drop-down
menu.
The preferences screen will appear.
NOTE: Most applications allow you to change these same printer driver options
from their "Print" and/or "Printer Setup" screens. Some applications such
as BarTender and NiceLabel save your settings with the label, others use
settings only for the current print job just sent to the printer.