Primera FX500E, User Manual

Page: 12 / 40

8
Hardware and Software Setup
C. LOADING LABEL STOCK
The inside wound or outside wound media rolls can be loaded into
the printer in the same way. In case media roll may become dirty or
dusty during shipment, handling, or storage, firstly remove the out-
side length of media, which helps to avoid dragging adhesive or
dirty media between the print head and platen roller. When loading
media, it must be placed onto the media hangers.
1. Open the Top Cover.
2. Put the Media Hanger through media supply roll, and then cen-
trally align with the two Media Shields to closely lean against
the media supply roll
3. Locate the media supply roll into the Media Compartment of
printer.
4. Push the Release Latch to open the printer module.
Media Hanger
Media Shields
PUSH
Module Release
Latch (Push)