Transfer Setup
Setup -
6
1
Range of Pre/Post alarm duration can be changed according to
Number of image setting.
Click ‘Apply’ to make above setting effective.
4
3
2
1
2
4
3
Number
of Image
Pre-alarm
Duration
Post-alarm
Duration
Define Number of image
transferred per second.
Descriptions
Range
Define duration of image
transfer before an event.
Define duration of image
transfer after an event.
1 ~ 5
1 / 10
/ 15 / 30
1 / 10
/ 15 / 30
Transfer Mode
Image Transfer method is selected from FTP and
E-Mail (SMTP).
To use image transfer, FTP and SMTP in the next sections must
be configured properly.
SD Card Record
If it is set to On, the image is saved into the SD card as well.
It will setup OFF automatically when SD card doesn't applied.
The SD card setting can be configured on the SD CARD section.
Pre/Post Alarm Image
Image Transfer due to event is configured by setting Image
transfer rate and Pre/Post alarm duration.
