Lens / White Balance Setup
5
Camera Setup -
Shutter
The slower the shutter setting, the brighter the image is. However, the
haunting can happen on the image when the object is moving fast.
Iris
The smaller number makes the brighter image.
Bright
F1.8/28dB means Iris and gain respectively. The later number in the
list makes the brighter image.
Gain
The smaller number makes the daker image.
1/2 ~ 1/10,000 (21 Steps, Default 1/30)
F1.8 ~ F14 / Close (14 Steps, Default F1.8)
0 (IRIS:CLOSE, GAIN:0dB)
~ 31 (IRIS:F1.6, GAIN:+28dB) (28 Steps, Default 17)
28dB ~ -3dB (16 Steps, Default 0)
Exposure Comp. Mode
In this mode, the internal brightness reference value can be shifted.
As a result, all exposure results are done automatically showing
different results. When AE mode is ‘Manual, Bright’, On/Off setup is
unavailable. (When AE mode is changed, Exposure Comp. Mode will
be disabled or Enabled automatically.)
Exposure Comp.
Spot AE Mode
In this mode, you can designate a particular spot in the image to be
weighted higher than other portions in the exposure calculations.
When AE mode is ‘Manual, Bright’, On/Off setup is unavailable.
(When AE mode is changed, Spot AE Mode will be disabled or Enabled
automatically.)
Spot AE Position
By clicking the ‘Set’ button, you can designate a spot in 16x16 black
blogs in a small screen. The screen is equivalent to the view of live
video. By clicking a block, a spot can be selected.
Noise Reduction
This function removes noise that appears based on the setting of
Gainto provide clearer live video. Higher setting value will increase
the effect of noise reduction. In bright conditions, changing the this
function will not have an effect.
Gain Limit
This function enables users to set the maximum limitation of gain to
get clear live video in low-light condition.
On/ Off
7 (GAIN:-10.5dB) ~ +7 (GAIN:+10.5dB)
(15 Steps, Default 0)
On / Off
Off / 1 / 2 / 3 / 4 / 5 (Default 3)
+6dB ~ +28dB (12 Steps, Default 14dB)
AE Mode
Full Auto
: The camera adjust the exposure by itself automatically.
Manual
: Triple factors i.e. Shutter speed, Iris, Gain can be adjusted by
users according to their preference.
Shutter Priority
: The shutter speed can be selected by the user while
iris and gain are controlled by camera automatically.
Iris Priority
: Iris can be selected by users while the shutter speed and
gain are controlled by camera automatically.
Bright
: Iris and gain can be selected in terms of brightness while the
shutter speed is automatically controlled.
Full Auto / Manual / Shutter Priority / Iris Rriority
/ Bright
