Alarm Input 1 Setup
Setup -
6
Input Device Setup
Select input device type from OFF / N.O. / N.C.
Activation Time
Select activation time from Always / Only Scheduled Time.
Description
Action
Alarm Output
Output
Duration
Alarm Image
Transfer
Activate alarm out (relay). None or 1.
Select time duration to maintain output form
3 / 5 / 10 / 20 / 30 sec. or Continue
Turn ON / OFF Image Transfer. Send image via
E-mail or FTP server. (For more detail see
Transfer Setup in this chapter)
Camera
Action
Setup the Camera Action when Alarm in.
Select among the None / Preset(1 ~ 255)
/ Scan(1 ~ 8) / Pattern(1 ~ 4) / Group(1 ~ 8)
/ Home Position.
4
Action
Define a counter action from Alarm Output / Alarm Image
Transfer / Camera Action when Alarm Input is detected.
Click ‘Apply’ to make above setting effective.
3
Operation
Off
NO
NC
Ignore this Input sensor.
The contact is normally open and closed when activated.
The contact is normally closed and open when activated.
Always
Only
Scheduled Time
An alarm event is activated whenever sensor
Input is detected.
An alarm event is activated only when sensor
input is detected during the scheduled time.
To setup the schedule, you need to define Start time and End time
followed by selecting Days.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to
9:00am Wed.
1
2
3
4
