5 Remote Control
_____________________________________________________________________________________________________________________________________
5-17
Only the first message unit is transmitted when the short string is requested
(command “L0"). The status information (2nd message unit) is not sent in this case.
Description of the Message Record Sent
The following table gives an overview of the possible lengths of the message record
depending on the selected operating mode.
A message record consists of one (short string format) or of two (long string format)
message units, followed by a terminator character. The second message unit is called
the status information.
40 char terminator character
Example: +01.0MRVDP00A0R2F0T2D0S0Q0MOFB00"+ Terminator
or in short string format (13 characters)
+01.0" + Terminator
Example:
ERROR 01 MR04P00A1R6F0T2D0S0Q0MOFB00"+ Terminator
ERROR 01 + Terminator
The numbers in brackets (..) apply for the number of characters in short string format.
The measurement reading or a text message appears in the first message unit.
Text messages are ERROR x, NULL, CAL.
Character positions not required are filled with blanks.
The second message unit (status information) commences at the 14th character.
