manualshive.com logo in svg

Prema 5017, User Manual

Share
Download
Prema 5017 User Manual Download Page 22

3  Quick Start

_____________________________________________________________________________________________________________________________________

3-1

3 Quick Start

3.1 Default Settings

When the unit is turned on for the first time, the following settings are defaulted to:

•

Measurement Function Vdc

•

Measurement Range 300V

•

Measurement Time 1s

•

Front Input Connectors Active

•

Automatic Filter On (AVG 10)

•

Pt100 sensor for temperature measurement

• all other functions switched off

The power-on setting can be stored in the menu "Configure, Settings, Save" .
You can set the instrument to the factory settings with the menu "Configure, Settings,
Load Fact, Set".

3.2 Scanner (5017SC)

You can find the inputs of the scanner  on the rear panel of the instrument. When de-
livered the front input connectors  are active.
The connections to the scanner can be done with two 50-pole sub-D connectors or
two adaptercards 3110 (see chapters "Accessories" and "Technical Specifications").

Summary of Contents for 5017


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands