AFV-P Series High Performance Programmable AC Power Supply
22
3
Local Operation
3.1
General
The product can support local operation or remote operation. The remote operation
enabled via complete communication interfaces, such as RS232, RS485, Ethernet,
USB or GPIB will be described in Chapter 8. In this section, the local operation ena-
bled via the touch screen and the rotary knob on the front panel will be described.
The product is configured for local operation when it is turned on.
3.2
Operation via the Touch Screen and the Rotary Knob
The product provides the user-friendly programming interface using the touch screen
and rotary knob on the front panel for users. Each display of the touch screen on the
product represents an operational page.
Before describing each operational page, the followings show how to use touch
screen and rotary knob to input programming data or options. When the power-on
procedures are finished (refer to Subsection 2.6), the touch screen will display the
MAIN page subsequently.
A. Touch Screen
Press the item shown on the touch screen directly, so as to choose the desired item
(see Figure 3.1). Use the virtual numeric and decimal keys to set value, and then
press the icon
on the touch screen to confirm. After setting value, users can
revise value by pressing the icon
, or press the icon
to return to the
previous page.
Figure 3.1 Press the desired item on the touch screen
