iPOWER TPD-800A Quick Installation Guide
TPD-800A Quick Installation Guide
This Quick Installation Guide is a basic introduction of the TPD-800A hardware and software configuration.
It is provided with the hope of helping you to configure the device fast and easily. For more detailed
information, please refer to the User Manual.
Ⅰ
. Hardware Configuration
1. Checking the devices and accessories first, one set of TPD-800A and one piece of network cable.
2. Set up the TPD-800A as Master. (M/S indicator on means the TPD-800A is Master, M/S indicator off
means the TPD-800A is slave).
Master Setting Method: Press Reset button on the device for 12 seconds (the interval of RUN light is 2
seconds) Setting is successful when the M/S indicator is on.
Slave Setting Method: Press Reset button on the device for 6 seconds (the interval of RUN light is 2 seconds.
Setting is successful when he M/S indicator is off.
