AFV-P Series High Performance Programmable AC Power Supply
113
7.4
Remote Control Software: Additional Features
A. Reset to Default Settings
To reset the setting of the remote control software to the default setting, please do
the following procedures step by step,
1
Click the item “File”, and then click the item “Load Default”
2
Select the desired settings to reset.
2.1
Click the icon “Default System Data” to enable/disable the reset of the system data.
2.2
Click the icon
“Default AC Setting Date” to enable/disable the reset of the
AC program mode.
2.3
Click the icon “Default DC Setting Date” to enable/disable the reset of the
DC program mode.
3
Click the icon “Start Load Default” to reset the program mode
(see Figure 7.12).
Figure 7.11
Item “File” and Item “Load Default”
Figure 7.12 Select the desired settings to reset