AFV-P Series High Performance Programmable AC Power Supply
40
3.5.2
TESTING Subpage (BASIC Mode)
If the operational mode is set to be the BASIC mode, the TESTING subpage at the
BASIC mode will be shown on the touch screen after entering into the SETTINGS page.
The manner of setting the operational mode can be referred to Section 3.5.1. Please
see the following figures,
Figure 3.24 TESTING subpages 1 & 2 (BASIC mode)
Figure 3.25 TESTING subpages 3 & 4 (BASIC mode)
The description for the items and the icons at the TESTING subpage (BASIC mode) are
given as follows,
1)
: Press to set the operational mode, with two options
of ADVANCE and BASIC.
2)
: Press to set the output mode, with two options of
AC and DC.
3)
: Press to enable/disable the over current foldback,
with two options of OFF and ON.
