Predator VX360, Owner'S Manual

Page: 16 / 38

16
Attaching the Camera Cable to the Control Case Video Connector
Before using the VX360 it is essential that the camera cable is connected correctly to the video
connector on the waterproof control case. The connection can only be made in a particular
orientation as the male and female components are asymmetric. Familiarise yourself with the
correct orientation by closely examining the two connectors.
o
Check both connectors are free of sand, grit, hair or any other particles that could damage
or otherwise compromise the waterproof seal
o
Mate the connectors in the orientation determined by their asymmetry and push firmly
together.
o
Slide the rotating locking ring on the camera cable connector over the control case video
connector and rotate clockwise onto the thread until tightly connected.
o
Do not cross thread. Only use hands to tighten.
o
Do not use tools as over tightening will damage the waterproof seal.
Product Setup