Predator VX360, Owner'S Manual

Page: 19 / 38

19
Attaching and Removing the Control Case from the Arm Strap
The control case can be attached and removed independently of the arm strap due to the
inclusion of the mounting rail. This facilitates camera angle set up, reviewing footage and
changing settings without having to remove the arm strap.
To attach the control case
o
With the arm strap attached to your left upper arm and your right hand holding the control
case with the video connector facing away from you and the waterproof microphone facing
towards you, line up the rails on the control case at the top end of mounting bracket and
slide the control case smoothly down the mounting bracket un
til an audible ‘click’ is heard
o
Check the union is secure by attempting to move the control case back up the mounting
bracket. It should remain secure with very little movement
To remove the control case
o
Depress the mounting bracket catch towards the arm
o
Simultaneously slide the control case up the mounting bracket
Tip
Before you set off, detach the control case
from the arm strap and mounting rails,
switch on and set to preview mode. Hold
the screen at arm’s length in front of you at
head level. You will now be able to see the
cameras’ true field of view. This allows you
to make any final adjustments to the
camera angle. Replace the control case
securely to the arm strap.
Product Setup