2. Tension the first stage drive belt to either the new or used belt specification, see
Stage Drive Belt Tension Adjustment" on page 52
3. Use a 1/2" socket to fully tighten the two Drive Components assembly bolts.
Torque
1
bolts to 180 in-lbs +/- 54 (20.3 +/_ 4.5 Nm).
4. Verify that the second stage drive belt is within the new or used belt specified tension,
see
"Second Stage Drive Belt Tension Adjustment" on page 56
. Retention the belt if not
within specification.
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center of
the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the bolt.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 108
6 Replacement Procedures
Drive Belt Replacement