Precor Experience Series Service Manual Download Page 208

Page: 208 / 248

3. Remove the Linkarm from the stairarm (moving arm models only):

a. Remove the #2 Phillips screw fastener and remove the Outer Linkarm

Cover. Retain part(s) and/or fastener(s) for installation.

b. Remove the 9/16" hex head screw and remove the Linkarm from the Stair-

arm weldment - Linkarm bracket and carefully lay onto the floor.

c. Remove the Inner Linkarm cover from the Stairarm weldment - Linkarm

bracket. Retain hardware and fastener for installation.

Stairarm Wheel Removal

4. Remove the 1/4" hex key bolt, washers (2x), Wheel, Wheel Axle, and retainer.

Retainer, Washers (2x), and Wheel Axle.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 200

6 Replacement Procedures

Stairarm Replacement

Summary of Contents for Experience Series

























































































































































































































































Search results

Summary of Contents for Experience Series

Reviews:

Precor Experience Series, Service Manual, Page: 208 / 248

Search results

Summary of Contents for Experience Series

Reviews: