Precor Experience Series Service Manual Download Page 83

Page: 83 / 248

1. Set the bottom of the Lift Front cover

onto the lift interface plate

and right/left Lift

Side covers (

) making sure the clips fit over the top edge of the covers. Then

press the front cover into onto the right and left Lift Side covers making sure the cover
tabs lock in place.

2. Position the Lift Top cover

into position on top of the Accessory Tray and press to

lock tabs in place.

3. Position the Goose Neck cover

into position on top of the Lift Front cover

and

press to lock tabs in place.

4. Reinstall the Goose Neck Gasket

around the goose neck weldment and press to

snap in place. Start at the front and alternately work your way around the weldment
tube finishing at the back.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 75

6 Replacement Procedures

Covers and Panels Replacement

Summary of Contents for Experience Series

























































































































































































































































Search results

Summary of Contents for Experience Series

Reviews:

Precor Experience Series, Service Manual, Page: 83 / 248

Search results

Summary of Contents for Experience Series

Reviews: