Precor Experience Series Service Manual Download

Page: 86 / 248

Description

Lift rear Cover

Removal Instructions

1. Remove the Goose Neck Gasket

, Goose Neck cover

, and Lift Top cover

see

"Lift Front Cover Replacement" on page 72

2. Remove the Accessory Tray

, see

"Accessory Tray Cover Replacement" on the pre-

vious page

3. Remove the two #3 Phillips fasteners, Then lift the Lift Rear cover

upward and rear-

ward to remove. Retain part(s) and/or fastener(s) for installation.

Installation Instructions

1. Slide the Lift Rear cover

downward onto the top of the Forward Frame Filler cover

while lightly pressing forward to engage the six cover attachment clips.

2. Secure using the two #3 Phillips fasteners.

3. Reinstall the Accessory Tray

, see

"Accessory Tray Cover Replacement" on the pre-

vious page

4. Reinstall the Goose Neck Gasket

, Goose Neck cover

, and Lift Top cover

see

"Lift Front Cover Replacement" on page 72

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 78

6 Replacement Procedures

Covers and Panels Replacement

Summary of Contents for Experience Series

























































































































































































































































Search results

Summary of Contents for Experience Series

Reviews:

Related manuals for Experience Series

Brands by name

Popular brands

Precor Experience Series, Service Manual

Search results

Summary of Contents for Experience Series

Reviews:

Related manuals for Experience Series

Brands by name

Popular brands