ConsoliDator Multi-Channel Controller
Instruction Manual
23
Contrast
Select
Adjust Contrast
and press the
ADJ
key continuously to darken the display
contrast. After the darkest possible setting is reached, the
ADJ
key returns the display
to its lightest setting.
Backlight
Selecting [YES] under Save BL automatically turns the backlight off if no buttons are
pressed for five minutes. This is recommended unless it is necessary to have the
backlight constantly on. When [NO] is selected the backlight is always on.
Baud Rate
Select any available baud rate.
Parity
Select [EVEN – 8E1] for Even parity, 1 stop bit.
Select [NONE – 8N2] for None parity, 2 stop bits.
Select [NONE – 8N1] for None parity, 1 stop bit.
Modbus ID
Specify an address for Modbus communication.
Tx Delay
Specify a serial data transmission delay (response.)
Place cursor at the channel you want to set and press
ENTER
.
