Model 1264 Powder Feeder
Operator’s Manual
_____________________________________________________________________________________________________________________
Issued: 04/16
Page 27
2. Connect other end of powder feeder gas supply hose to a console flow
controlled supply as directed in the control console operator’s manual.
3. Connect powder hose (P/N 985-4-12) to powder exit port on bottom
of powder feeder.
4. Connect other end of powder hose to gun at its powder tube as
directed in the gun operator’s manual.
5. Connect powder feeder power cable (P/N 5005028) to power inlet on
bottom of powder feeder.
6. Connect other end of powder feeder power cable to 110 VAC power
source. The powder feeder is now operational.
7.
Verify that the canister lid is secured and apply carrier gas to the
powder feeder. Check for leaks.
Figure 3-2. Model 1264 Plasma / HVOF rear view.
Heater Blanket
Connection
Gas Inlet
