background image

Precision Pumping Systems    

    GoPPS.com    

    6515 Business Way, Boise, ID 83716    

    208.323.5300        

Irrigation Industry 3-Year Warranty

4

The equipment furnished as part of this agreement is subject to the original manufacturer’s warranty only.  In addition, Precision Pumping 

Systems (PPS) provides the following LIMITED WARRANTY:

  Telephone technical support free-of-charge for the life of your product.

Limited 3-Year Warranty

PPS warrants that its products and systems will be free from defects in material and workmanship for a period of three (3) years from the 
date of placing the equipment in operation or forty (40) months from the date of completion of manufacture of the equipment, whichever 
shall occur first. Initial start-up and preventative maintenance must be performed by an authorized PPS representative or the warranty shall 
be void. This warranty does not apply to equipment that has been damaged, misapplied or modified in any way.
Terms and Conditions:
1.   Warranty claims must be submitted directly to Precision Pumping System within the valid warranty period. 
 

No claims for warranty will be paid without prior approval by PPS.

2.   The determination regarding defective status of components or products is at the sole discretion of PPS.
3.   If a component or product is determined to be defective by Precision Pumping System, then PPS shall, at its sole discretion, correct the 
 

defect by performing a suitable repair to the equipment or by providing a replacement part.

4.   Proper start-up and operational procedures must be followed, and the required annual preventative maintenance must be performed 
 

by authorized PPS personnel or this warranty shall be void.

5.   Within the first year after start-up, PPS will cover labor and materials costs. In the second and third years of the warranty period only   
 

materials costs are covered by this warranty – no labor costs will be paid.

Disclaimers
1.   PPS shall not be liable for repairs, replacements or adjustments to the Equipment or costs of labor performed by the Purchaser without  
 

prior written consent of PPS.

2.   All PPS warranty provisions require the Purchaser to operate and maintain the Equipment according to good industry practices and to  
 

comply with all recommendations by PPS regarding operation and maintenance.

3.   PPS systems are equipped with safety features which protect key components from damage. Many of these safety features are 
 

overridden when operating the system in “Hand”. Operation of the system in “Hand” voids this warranty unless directly authorized by a  

 

PPS technician.

4.   There is no warranty coverage for mechanical pump seals or packing glands unless the failure occurs during the initial start-up of 
 

the system.

5.   Any modifications to the pumping system without written approval by PPS shall void this warranty. Such modifications include, but are  
 

not limited to, changes to PLC/HMI programming, removing or disabling sensors, or adding or removing valves or piping.

6.   PPS makes no performance warranty unless specifically stated in its proposal.
7.   The effects of corrosion, erosion and normal wear and tear are specifically excluded from the PPS warranty.
8.   PPS provides no warranty for used or existing customer owned equipment of any character expressed or implied.
9.   Blown fuses regardless of cause are excluded. Damages or problems created by or caused by lightning or power surges, low voltage, or  
 

other incoming power related problems are excluded from these warranties.

10.   Damages created by or resulting from excessively dirty water, mud, silt, sand, grass, weeds, or any other organic or inorganic materials,  
 

clogged pump intake impellers or suction screens, and/or build-up of sediment in the sump are excluded.

11.   Natural disasters, misuse, abuse, or misapplication, or other causes beyond PPS’ control, and acts of God are excluded from 
 

these warranties.

12.   PPS will not accept any responsibility for the costs associated with systems installed in difficult to access areas including, but not limited  
 

to, those requiring cranes in excess of 5 tons, divers, helicopters, excavators, dredges, etc. Determination of difficult to access locations  

 

is at the sole discretion of PPS.

13.   PPS MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE,  
 

AND ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABLITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE   

 

SPECIFICALLY EXCLUDED.

14.   PPS will assume no liability for any incidental or consequential damages with respect to this contract or the Equipment and services   
 

furnished hereunder, in connection with the performance or breach thereof, or from the manufacture, sale, delivery, installation, repair  

 

or technical direction covered by or furnished under this contract. This is a commercial transaction.

15.   It is also agreed that the owner’s or purchaser’s sole remedy, whether for breach of contract, warranty or in tort, shall be limited to the  
 

return of any goods and repayment of the contract price or the costs of repair and replacement of defective goods, at the option of PPS.  

 

No claim by the buyer of any kind shall be greater in amount than the net purchase price of the equipment.

Choice of law and arbitration:  Any claim or controversy arising under or relating to this warranty shall be submitted for arbitration and   
 

shall be governed by the laws of the state of Idaho.

Summary of Contents for SuperNOVA































































Reviews: