16
17
Step 4:
To fi nalize the installation of the operator system, it is mandatory
reposition the cover and screw it with 2 screws PP MS 3,9 x 9,5 mm (already
available on the product).
TRIFLEX CONNECT BRUSHLESS BOARD
The Trifl ex Connect Brushless board allows all parameters to be confi gured through the
PROG programmer in three languages (Portuguese, English or Spanish) or trough the
mobile app BLUE (In this case, it is necessary to purchase the “BLUE” module from PPA).
It can control all PPA operator models with Brushless motors.
It has an EEProm¹ memory that stores the codes of the Transmitters recorded in
encrypted form. The board is also compatible with Rolling Code Transmitters with
PPA’s own protocol.
System activation can be carried out via remote control through the built-in radio
receiver, a single receiver or any other device that provides a normally open (N.O.)
contact, such as a push button.
Trifl ex Connect Brushless is ideal for use with PPA Nobreaks. It has features for
reducing consumption when operating on battery power.
The gate positioning control is done through a PPA patented encoder system
called “Reed Digital”.
Electrical Connections
Electrical connections can be seen in the following diagram:
¹ EEPROM (Electrically-Erasable Programmable Read-Only Memory) is a non-volatile storage chip used in computers and
other devices.
