16
Screen 2.1-3
Input current phases to neutral for three phase or single phase(units A).
Output current phases to neutral for three phase or single phase(units A).
Screen 3.0
Setting screen, with basic and advance operation.
Fig.14 Setting screen
Screens 3.1.1-1
You can program the time “hh:mm:ss” (hours/minutes/seconds) and the date “dd/mm/yy”
(day/month/year).
You can select the display language between the available options (it may vary).
You can select input source “Line” or” generator”.
You can program the Modbus Address. The range of addresses goes from 1 to 247.
You can program the Modbus baud-rate. The options are the following:
‘’2400’’
‘’4800’’
‘’9600’’
‘’19200’’
You can program the Service Phone, Service contactor, Service mail and Service Address.
