12
3. Operations
3-1. Button Operation
1) Make sure that the two strings of batteries are connected correctly at UPS’s ”+,GND,-” terminals and the
breaker of the battery pack is at “ON” position (only for long-run model).
2) Press the “Power On” button to set up the power supply for the UPS. UPS will enter into power on mode.
After initialization, UPS will enter into “No Output mode”.
3-2. LCD Panel
Touch icon to choose between different menus (1.0, …, 5.0). and enter into the sub-screen.
MAIN
Initializing
INFORMATION
CONTROL
SETTING
DATA LOG
MEASURE
ON/OFF
UPS
BATTERY
TEST
MUTE
ALL
MEASURE1
MEASURE2
MEASURE3
BASIC
ADVANCE
BASIC1
BASIC2
ELECTRICAL
BATTERY
MISCELLANEOUS
PASSWORD
SYSTEM
PARAMETER
VOLTAGE
CALIBRATION
INSTALL
INFORMATION
INITIAL
CURRENT
CALIBRATION
MISCELLANEOUS
DATA LOG
PARAMETERS
CALIBRATION
EEPROM
TOUCH
CALIRATION
Screen0.0
Screen1.0
Screen2.0
Screen3.0
Screen4.0
Screen5.0
Screen1.1
Screen2.1
BASIC
INFORMATION
RATED
INFORMATION
PARAMETER
INFORMATION
Screen3.1
Screen4.1
Screen3.1.1
Screen3.1.2
Screen3.1.3
Screen3.1.3.1
Fig.1 Display messages menus and classification in submenus
