Power i-Cruise Dial, Instruction Manual, Page: 9 / 36

Installation schematic view and an installation procedure
Work procedure (harness installation classified by vehicle type)
‑8‑
The pure connector of
the accelerator upper part is
removed and the harness
according to vehicle type is
connected with an accelerator
at a pure connector.
Accelerator
Harness according
to vehicle type Pure connector
Please extract an ignition key,
stopping vehicles at an even
place and applying handbrakes
firmly.
Please remove the minus
terminal of a battery.
Please remove the connector of
a pure accelerator and connect
the harness according to vehicle
type (option).
①
②
③
Work procedure (Installation preparation )
ENGINE
START
STOP
Ignition OFF
A key is extracted. Ignition OFF
(Push start type vehicle)
The minus terminal of
a battery is removed.
or