Power i-Cruise Dial, Instruction Manual, Page: 5 / 36

By click operation of a dial, the accelerator response of vehicles can be
chosen from five patterns. (It is canceled during auto‑cruise.)
According to accelerator valve travel, the lighting color of LED of a dial
changes during a run. In 1 to 60% of accelerator valve travel, it changes to
green, yellowish green, yellow, a sour orange, and red. In 61% or more of valve
travel, it becomes red blink, and blink speed will be three steps early as it
approaches to 100%.
When the power supply of this product is ON, if a brake is stepped on in the
state where the accelerator was stepped on, a throttle will be turned OFF (0%
of valve travel) compulsorily. Even when an accelerator stops returning by a
carpet and a thing being caught in an accelerator etc., vehicles can be slowed
down and stopped certainly.
A function and the feature
Auto throttle control function
EcoNavi function
Accelerator canceler function
In order to enable an accelerator canceler function, please be sure to
connect a brake signal wire.
‑4‑
Normal (power supply OFF)
Eco‑auto Power auto
Power (1)
Power (2)
An accelerator response is in a pure state.
An accelerator response becomes sharper than auto.
It becomes High Response all range.
An accelerator response is the sharpest and becomes sporty.
It becomes a super high response all over the districts.
An accelerator response becomes sharp and
becomes a powerful run.
Moreover, in order to prevent the fuel consumption
aggravation by a superfluous response,
effectiveness condition is self‑adjusted according to
speed. An accelerator response becomes loose and
supports eco‑operation.
Moreover, effectiveness condition is self‑adjusted
according to speed so that the displeasure in a low
response may not arise.
Caution