Power i-Cruise Dial, Instruction Manual, Page: 34 / 36

An error arises to the speed which started auto‑cruise.
？
Since there is possibility of the loose connection of a speed signal
wire (blue), please redo wiring. Moreover, please connect the speed
signal wire to the wiring diagram according to vehicle type in the
position of a statement.
！
Because of safety, when speed is about 30 km/h or less, auto‑
cruise cannot be started.
Moreover, when it becomes about 30 km/h or less during auto‑
cruise, auto‑cruise is canceled automatically.
！
Wiring of a brake signal wire (red) may have an error.
Only when a brake is stepped on, please connect the brake signal
wire to the line set to 12V. If it always connects with 12V, the auto‑
cruise will not operate.
！
Please redo study (P18) of speed. If the speed at the time of study
is greatly different from 60 km/h widely, accuracy will worsen.
Please perform study of speed in the state of 60 km/h and
accelerator regularity.
！
If auto‑cruise is started during sudden acceleration or a sudden
slowdown, an error may be felt by the time lag of actual speed and
meter.
Please start auto‑cruise in the state of speed and accelerator regularity.
！
It controls not to perform sudden accelerator operation for safety.
When it comes to a slope from a flat way, speed may shift
temporarily.
！
This product does not have the function to perform brake operation.
When speed is unmaintainable only by engine braking on a steep
downward slope etc., a driver needs to do brake operation and
please adjust speed.
！
‑33‑
Troubleshooting