Power i-Cruise Dial, Instruction Manual, Page: 23 / 36

Operation method of auto‑cruise
For starting auto‑cruise
① For carring out Auto‑cruise in a present speed.
② For carring out Auto‑cruise in a previous speed.
Since it accelerates automatically, please do not use a resume function in the
situation where the distance between two cars is narrow.
For start auto‑cruise, please push a dial
once and make it into ready state.
A button blinks blue.
Please lift a hand in the place which
turned the dial to the left until it is
responsive. Then, please take a foot off
an accelerator.
Blink of a button changes to lighting and
an accelerator is controlled automatically
to maintain the present speed.
Please lift a hand in the place which
turned the dial to the right until it is
responsive.Then, please take a foot off an
accelerator.
To the speed which was carrying out the
cruise last time, it accelerates
automatically (slowdown) and carries out
auto‑cruise at the same time blink of a
button changes to lighting.
‑22‑
It is after carrying out auto‑cruise at speed of 50 km/h or more that can use a
resume function.
If speed is less than 50 km/h, the resume function will not operate and the speed for
resume will be simultaneously eliminated from a memory.
Push a dial one time
Warning
Caution