Power i-Cruise Dial, Instruction Manual, Page: 30 / 36

About the EcoNavi function
‑29‑
Light (green)
Off
Light (yellow green)
Light (yellow)
Light (orange)
Light (red)
Blink (red)
Blink (red)
Blink (red)
According to accelerator valve angle, the lighting color of LED of a dial always
changes gradually under a run and regardless of auto‑cruise.
61％
〜
60％
41％
〜
40％
31％
〜
30％
21％
〜
20％
11％
〜
10％
1％
0％
〜
90％
76％
〜
75％
90％
76％
〜
100％
91％
〜
100％
91％
〜
75％
61％
〜
60％
41％
〜
40％
31％
〜
30％
21％
〜
20％
11％
〜
10％
1％
0％
〜
Accelerator valve angle
Blink earliness: slow
Blink earliness: It is early.
The light is switched
on according to
throttle control mode.
( )
Even if it has not stepped on the
accelerator during auto‑cruise, an LED
color lights up according to the
accelerator valve angle controlled by i‑
Cruise.
When performing acceleration by the
accelerator or a dial during auto‑cruise,
the thing of the largest valve angle at
three, auto‑cruise control, dial
acceleration, and pedal acceleration, is
reflected in actual acceleration, and an
LED display also follows it.
When not having stepped on the
accelerator (0%), LED lights up
according to the mode of throttle
control.
For example, while using P‑AUTO,
accelerator valve angle lights up in red
at least 0%.
If the mode of throttle control is
changed during a run, the LED color
according to the mode of throttle
control will light up for about 1 second.
Important