Power i-Cruise Dial, Instruction Manual, Page: 12 / 36

Please wipe off dirt and oil of an
attachment position finely with
clean cloth etc.
Please stick double‑stick tape on
the back of a dial, unite and stick
direction, and fix to a position.
Please put a mark on an
attachment position and remove
the parts which attach from
vehicles.
As shown in the left figure,
please make a screw hole in an
attachment position two places.
Please fix a dial unit using an
attached screw and washer, and
attach parts to vehicles as
before.
①
②
①
②
③
Work procedure(Fixation of a dial unit)
A dial unit has two kinds of fixed methods, double‑stick tape and a screw.
Please choose the suitable fixed method according to an attachment position etc.
‑11‑
To fix with double‑stick tape
To fix with an attached screw
Please carry out attachment to the
part whose thickness is from 2.5
mm to 4.0 mm.
A screw has not become tight with
the thickness besides the above‑
mentioned range, and there is a
possibility that a dial may separate
while in use, by it.
2
2
m
m
Screw hole
4.5 mm in diameter
Installation schematic view and an installation procedure
Important
Important