Initial operation
With initial operation install accompanying catch bracket (12) onto mudguard so that
it is within reach and can be seen.
Insert moveable hand break lever (13) onto tractor for every run.
- Carry out brake test.
Attention!
If brake fault occurs, immediately stop tractor and clear fault.
Should the adjustment action on the hand
brake lever no longer be adequate, then with
the help of the notches on the brake cam axle
lever, alter the position of the lever (19)
correspondingly.
The lever adjustment (19) must be
carried out on both sides
simultaneously.
Adaption to tractor
- Loosen cable clamps (1) and unthread the cable through the support (2).
- Shorten bowden cable covering (see diagram) to a point where trouble-free cornering is still is possible.
- Rethread cable and secure with cable clamps.
- Check lever action (B) and adjust with
hexagonal nut (3) if necessary.
Shortening the bowden cable
The extra long brake cable is manufactured to suit
the various designs of different tractor types.
In order to guarantee optimal function of brake
unit, the cable (A) should run in a straight line if
possible.
Brake adjustment
- If brake linings are worn out then brake shoes must be adjusted. This is carried out by turning adjusting nut (3) on hand brake lever.
511 / BREMSANLAGE 9300 GB
- 9 -
GB
BRAKE UNIT
(moveable handbrake)
