- 14 -
HYDRAULIC OPERATION
537 / HYDR.KAB.BED. 9501 GB
GB
Operation elements
Pick-up and hydraulic drawbar
1. Put lever switch "6" into position
"I"
.
2. Put lever switch "7" into position
"A"
.
3. Select desired funktion with lever (9 resp. 10).
4. Engage control valve (ST).
Dry forage extension
1. Put lever switch "6" into position
"I"
.
2. Put lever switch "7" into position
"E1"
.
3. Engage control valve (ST).
Tail gate
1. Put lever switch "6" into position
"I"
.
2. Put lever switch "7" into position
"E2"
.
3. Engage control valve (ST).
Operation of hydraulic scraper floor drive
Front operation (from the tractor cabin)
1. Shift lever (61) to the "ON" position.
2. Put lever switch (6) into position
II
(scraper floor drive).
3. Engage or disengage the scraper floor drive with the control
valve (ST).
Rear operation
1. First shift the lever (61) into the "OFF" position.
2. Put lever switch (6) into position
II
(scraper floor drive).
3. Engage control valve (ST).
4. Switch scraper floor drive "on" or "off" with lever (61).
Safety tips
Please take particular care when the operating
elements on the trailer and the tractor are to be used
simultaneously by more than one person. A
conscientious arrangement should be made by those
concerned before operation.
An example:
Danger of injury arises if a person stands at the rear of the
trailer and somebody in the tractor cabin activates a switching
function (opening the tailgate, switch on the driving gear, ...).
Mounting bracket
• The accompanying bracket (L) is for mounting the hydraulic
switching element in the cabin and is to be installed on the
tractor's mud guard.
Operating elements
• Depending on the trailer's fittings, the order of the operating
elements can differ slightly to the representation shown. For
example, the lever with positions "
E1-A-E2
" can only be
used on trailers with all extras (e.g. hydraulic drawbar,
hydraulic dry forage extension, tailgate).
The following operating instructions refer to trailers
with all extras
• Shift lever "6" serves to reverse the hydraulic flow between
the the oil cycle of the hydraulic scraper floor drive and the
oil cycle of the preselection levers for the Pick-up lift,
drawbar, etc..
ST
=
Control valve
0
=
0-position
I + A
=
Pick-up (9), hydraulic drawbar (10)
II
=
Hydraulic scraper floor drive
I + E2
=
Tail gate
I + E1
=
Dry forage extension
P
=
Pressure hose
T
=
Runback hose
TD27/93/25
L
A
E1
E2
TD27/93/24
II
0
7
10
P
T
I
6
9
ST
