5
MA-Di
COMPRESSED AIR AT ITS BEST
2 Safety precautions
2
SAFETY PRECAUTIONS
Please read these Operating Instructions before you start up the
measuringSYSTEM. These Operating Instructions must be kept at
a place that is accessible to all users at any time.
2.1
Intended use
The measuringSYSTEM is exclusively intended for use in piping line
systems for operating compressed air, unless its permission for the
use with other gases is expressly stated on the calibration certificate.
Due to its design, it can be operated in pressure systems up to PN 16.
CAUTION
Any other use than the one described does not ensure the
safety of persons and the entire measuring device and is not
permitted.
The manufacturer shall not be liable for damage that occurs as a
result of improper or not intended use or installation.
To avoid damage to the devices or health risks,
no manipulations
with tools
on the measuring devices are allowed unless they are
expressly described in these Operating Instructions.
The measuringSYSTEM must not be operated or assembled and dis-
mantled under the ambient conditions indicated in the technical data.
Otherwise, measurement inaccuracies occur or device failures cannot
be excluded.
To ensure the safety of the user and the function of the devices, the
start-up steps, inspections and maintenance activities recommended
by the manufacturer shall be observed and conducted.
For reasons of clarity, these Operating Instructions do not include the
complete detail information. Should you wish to obtain further infor-
mation or should any special problems occur which are not described
in detail in these Operating Instructions, the required information can
be requested directly from the manufacturer.