28
*
Reduce value:
Let the display run up to the maximum setting.
After that, it starts again from the minimum setting.
Adjust the display unit
Uni
before you determine the values for the
parameters
SPx, rPx, ASP
and
AEP
. As a result, you avoid rounding errors
in the internal conversion to other units and exactly obtain the desired
values. Delivery condition:
Uni = nm3h
.
If no key is pressed for 15 s during the setting process, the device returns
to the run mode with unchanged values.
Change from menu level 1 to menu level 2
Press the
Mode / Enter
key until
EF
is displayed.
Shortly press
Set
.
The first parameter of the submenu is
displayed:
HI
.
Locking – unlocking
To avoid unintended incorrect entries, the device can be locked
electronically.
Delivery condition: unlocked.
Make sure that the device is in normal
working condition.
Press
Mode / Enter
+
Set
keys for 10 s.
Loc
is displayed.
During the operation,
Loc
is displayed
briefly when the attempt is made to
change the parameter values.
Press
Mode / Enter
+
Set
keys for 10 s.
Loc
is displayed.
If
SLoc
is displayed during the attempt to change a parameter value,
either an IO-link communication is active (preliminary locking) or the
sensor is durably locked through the software. This locking can only be
released with the aid of a parameter setting software.
8 Progr Parameter setting