41
MA-Di
COMPRESSED AIR AT ITS BEST
10 Troubleshooting
10 TROUBLESHOOTING
10.1
Replacement of defective parts
WARNING
If defects cannot be remedied, the products must be shut down
and protected against unintended commissioning. Immediately
replace all other damaged parts.
Any damage on the compressed air meter that affects pressure
safety, may
only be remedied by authorized personnel
.
After each repair, the technical data of the specifications must be
checked by qualified personnel, e.g. pressure test.
For ordering spare parts, please contact our service team, e.g. by
telephone under +49 (0) 561. 506 309 -72 or by email to
10.2
Replacement of O-ring and sealing ring
• Keep the sealing areas clean from contaminations.
• Remove sticky deposits from time to time.
• In the case of leaks, contact your supplier.
CAUTION
Risk of fluid leakage!
The replacement of sealings may only be
performed by authorized qualified personnel.
10.3
Returning sensors
If the sensor needs to be repaired, please contact your supplier.
Use the original packaging for the return.
10.4 Disposal
Environmental compatibility was taken into account in the best possible
manner for the sensor design. According to the EU Directive 2002/96/EC,
the compressed air meter must be disposed off in a
separate collection
of electrical and electronic devices
or may be returned to the supplier for
disposal. It
must not be disposed of with the unsorted domestic waste.
Please observe the local regulations.