Positron AK355 Installation And User Manual Download Page 75

Page: 75 / 165

AK355 System Installation and User's Guide

Positron Access Solutions

180-0037-002 R01

2.3.8.17 RT > Pair > History

The History tab displays the downstream PM information for the Pairs supported
by the MSPAN. This PM data is separated into three sections and the PM can
be displayed for each of the Pairs of the MSPAN.

1 The heading section provides summary information for the MSPAN

including upstream Pair Capacity, Rate, and SNR Margin values.

2 The 15-Minutes section provides PM data for 15-Minute intervals for the

last 24-hours.

3 The 24-Hours section provides PM data for the previous 7 days.

The page can be provisioned to refresh automatically, and time-stamp
information is displayed for each of the entries.

Summary of Contents for AK355






































































































































































Search results

Summary of Contents for AK355

Reviews:

Related manuals for AK355

Brands by name

Popular brands

Positron AK355, Installation And User Manual

Search results

Summary of Contents for AK355

Reviews:

Related manuals for AK355

Brands by name

Popular brands