Positron AK355, Installation And User Manual

Page: 77 / 165

AK355 System Installation and User's Guide
Positron Access Solutions 77 180-0037-002 R01
Reboots the CO unit, and when the unit reboots, the unit selects the
firmware version in the Standby partition.
Reboot
Reboots the CO unit, and when the unit reboots, the unit selects the
firmware version in the Active partition.
Reset PM
Resets only the Performance Monitoring data in the CO unit.
Reset Logs
Resets only the Alarm Logs in the CO unit.
Reset PM/Log
Resets only the Alarm Logs in the CO unit.
Reset to Factory Defaults
Resets the CO to factory defaults.
Switch to Ethernet Mode/DS3 Mode (for Systems supporting DS3)
Switches the CO to the desired mode.
Export Logs
Opens a dialog box enabling you to export the CO System Alarm and
Performance Monitoring (PM) logs.
Right-Clicking on an RT unit allows you to select the following system
management options:
Revert Software and Reboot
Reboots the RT, and when the unit reboots, the unit selects the
firmware version in the Standby partition.
Reboot
Reboots the RT, and when the unit reboots, the unit selects the
firmware version in the Active partition.