Positron AK355, Installation And User Manual

Page: 87 / 165

AK355 System Installation and User's Guide
Positron Access Solutions 87 180-0037-002 R01
3.3.2 Switching from Ethernet Mode to DS3 Mode (for Systems supporting DS3)
1 Go to the Tools tab.
2 Right click on the RT Unit. Note: Always start this process by switching
the RT unit first.
3 Select Switch to DS3 Mode from the RT drop-down box and then select
OK. This will initiate a process that will result with the RT rebooting.
4 Right click on the CO Unit once the RT Unit disappears.
5 Select Switch to DS3 Mode from the CO drop-down box and then select
OK. This will initiate a process that will result with the CO rebooting.
Note: Wait a couple of minutes before continuing with the remainder of
this process.
6 Go to the File Menu and select Connect to... This will bring up the Login
to AktinoView dialog box.
7 Type in the Username and Password. The default Username is
"superuser" and the default Password is also "superuser."
8 Click Login.
9 Follow the same process when returning to Ethernet Mode.