Positron AK355, Installation And User Manual

Page: 165 / 165

AK355 System Installation and User's Guide
Positron Access Solutions 165 180-0037-002 R01
Proceed through the following steps to perform the System Software Upgrade:
Note: All MSPAN co nnections must be up.
1 Go to2 Select Partners > Partner Login.
3 Select the Registered Users Click Here to Login option if you are
already a registered user.
Note: If you are not a registered user, select the Partner Portal Request
Form option and allow 24-48 hours for your account to be setup.
4 Enter Name and Password into the FileMan Login dialog box located on
the Customer/Partner Portal.
5 Select Firmware - Unified General Release AK355.
6 Select the appropriate software version.
7 Select the corresponding self-extracting .exe file and store the file in the
place of your choice on your PC.
8 Extract the files from the self-extracting .exe file to a location of your
choice.
9 Go to the tool bar and select Action Menu > System Software Upgrade...
This will bring up the System Software Upgrade dialog box.
10 Select the system you want to upgrade and then click on the Upgrade
button.
11 Select the folder with the firmware files created in step 8 and click the OK
button.
12 Select Yes to switch and reboot after upgrade if you choose to upgrade
immediately. Otherwise, you can switch and reboot manually later.
13 Select OK to co nfirm the selected system(s) will be upgraded to the
desired version.
The system will begin the process of upgrading the system. Note that this
process will take a few minutes. The RT's will be the first to reboot
followed by the CO's.