Portwell FUDA3-S1 12 Series, User Manual

Page: 15 / 104

System Installation
FUDA3-S1x12 Series Panel PC User’s Manual 2-3
Jumpers
JP1
Panel Backlight Enable Select (Default: 1-3, 2-4)
JP2 Panel Power Select (Default: 1-3)
JP3 CMOS Setting (Default: 1-2)
JP4 Mini-mSATA/mini-PCIe Select (Default 1-2: Mini-mSATA)
JP5 Auto Power On (Default: 2-3)
JPA1 COM1 RI Setting (Default: 3-4)
JPA2 COM2 RI Setting (Default: 3-4)
JPB1 COM3 RI Setting (Default:3-4)
JPB2 COM4 RI Setting (Default:3-4)
SW1 Reset Button
SW2 Power Button
D29 State LED
J4: GPIO Connector (2*5 Pin Header/2mm):
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GPIO1 2 GPIO5
3 GPIO2 4 GPIO6
5 GPIO3 6 GPIO7
7 GPIO4 8 GPIO8
9 GND 10 +5V
J5: LPC Debug Port Pin Assignment
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LAD0 2 3.3V
3 LAD1 4 LPC_RESET
5 LAD2 6 LPC_FRAME
7 LAD3 8 LPC_CLCOK
10 GND
J11: Power Input Connector (Terminal Blocks 3Px1/5.08mm female)
PIN NO. DESCRIPTION
1 GND EARTH
2 Vin-
3 Vin+
J15: Front Panel Connector (1*5 Pin Wafer/2mm)
PIN NO. DESCRIPTION
1 LED (Hi: Green LED +; Low: Orange LED -)
2 LED (Hi: Orange LED+; Low: Green LED-)
3 Power Button
4 Power Button
5 NC