Portwell FUDA3-S1 12 Series, User Manual

Page: 76 / 104

BIOS Setup Information
FUDA3-S1x12 Series Panel PC User’s Manual 4-17
USB 3 Port #1
Enable/Disable USB 3 Port 1:
Choices: Enable (
★
Default), Disable.
USB 3 Port #2
Enable/Disable USB 3 Port 2:
Choices: Enable (
★
Default), Disable.
Common USB Configuration
Legacy USB Support
Enables Legacy USB support. AUTO option disables legacy support if no USB
devices are connected. DISABLE option will keep USB devices available only for
EFI applications.
Choices: Enabled (
★
Default), Disabled.
USB Mass storage Driver Support
Enable/Disable USB Mass storage Driver Support.
Choices: Enabled (
★
Default), Disabled.
USB hardware delays and time-outs:
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Choices: 20 sec (
★ Default).
Device reset time-out
USB mass storage device Start Unit command time-out.
Choices: 20 sec (
★ Default), 1 sec, 5 sec, 10 sec.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. ‘Auto” uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
Choices: Auto (
★
Default), Manual.