Portwell FUDA3-S1 12 Series, User Manual

Page: 60 / 104

BIOS Setup Information
FUDA3-S1x12 Series Panel PC User’s Manual 4-1
Chapter 4
BIOS Setup Information
FUDA3-S1x12 Series Panel PC adopts PEB-99A5 mother board. PEB-99A5 is
equipped with the AMI BIOS stored in Flash ROM. These BIOS has a built-in
Setup program that allows users to modify the basic system configuration easily.
This type of information is stored in CMOS RAM so that it is retained during
power-off periods. When system is turned on, PEB-99A5 communicates with
peripheral devices and checks its hardware resources against the configuration
information stored in the CMOS memory. If any error is detected, or the CMOS
parameters need to be initially defined, the diagnostic program will prompt the
user to enter the SETUP program. Some errors are significant enough to abort the
start up.
4.1 Entering Setup—Launch System Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <Del> key will
enter BIOS setup screen.
Press <Del> to enter SETUP
If the message disappears before responding and still wish to enter Setup, please
restart the system by turning it OFF and On or pressing the RESET button. It can
be also restarted by pressing <Ctrl>, <Alt>, and <Delete> keys on keyboard
simultaneously.
Press <F1> to Run General Help or Resume
The BIOS setup program provides a General Help screen. The menu can be easily
called up from any menu by pressing <F1>. The Help screen lists all the possible
keys to use and the selections for the highlighted item. Press <Esc> to exit the
Help screen.