System Installation
FUDA3-S1x12 Series Panel PC User’s Manual
2-16
2.7 Getting Started
FUDA3 Series Panel PC support 12~24V DC (±20%) input via 3-pin terminal
block connector. (Minimum 22 AWG, 90°C wiring conductor for power
connection)
Using DC source input Method:
1. Male-type 3-pin terminal block connector
is located at rear I/O
2. Take the female type 3-pin terminal block
connector in accessory kit
3.
Plug DC source cable into 3-pin
terminal block connector and then fix it by
screw driver
4.
Plug 3-pin thermal block cable into
power input connector of system and then
fix it ear by screw driver
Using AC/DC Power adaptor Input Method:
60W AC to DC power adapter and power switch cable from power adapter to 3-pin
terminal block connector is an optional accessory.
1.
Screw 3 pin terminal block cable into
power output connector of AC/DC
power adaptor
2. Connect 3-pin terminal block
connector into Panel PC through
AC/DC power adaptor.
Summary of Contents for FUDA3-S1 12 Series
Page 12: ...System Overview FUDA3 S1x12 Series Panel PC User s Manual 1 9...
Page 73: ...BIOS Setup Information FUDA3 S1x12 Series Panel PC User s Manual 4 14...
Page 102: ...Frequent Asked Questions FUDA3 S1x12 Series Panel PC User s Manual 6 5...
Page 104: ...Frequent Asked Questions FUDA3 S1x12 Series Panel PC User s Manual 6 7...
