manualshive.com logo in svg

Porsche PCM3.1, Operating Manual

The Sune Technology PCM3.1 Installation Manual is a comprehensive user guide designed to assist you in effortlessly installing and optimizing your PCM3.1 system. This manual provides step-by-step instructions alongside detailed diagrams to ensure a smooth installation process. Get your free download of this essential manual at manualshive.com.

Share
Download
background image

NAVI

161

During off-road navigation, only individual des-

tinations (landmarks) are stored in the list of 

previous destinations.

Landmark lists can be stored in the personal 

destination memory.

Route guidance in landmark navigation

Route guidance is by means of a compass display 

with the vehicle symbol in the centre of the com-

pass rose.

The orange-coloured direction arrow always 

points in the direction of the landmark currently 

being navigated to.

The various landmarks are shown as coloured 

flags. 

The angular deviation between the current direc-

tion of travel and the direction to the next land-

mark is shown as an orange-coloured arc segment 

and indicated in degrees.

Map view in landmark navigation

The individual landmarks are shown as flags in the 

map view:
– Orange-coloured flag: next landmark
– Blue flags: landmarks that have not yet been 

driven to 

– Checked flag: the current destination land-

mark.

The routes between the landmarks that have not 

yet been driven are shown with a blue line.
If the route has not yet been covered in full, the 

portion of the line already covered is shown in or-

ange.

Additionally, a compass is displayed at the top left 

to aid orientation.

When a landmark is reached, the system outputs 

the message “Landmark XX reached”.

Recording a trip section (trace)

Off-road navigation allows you to record a section 

of a trip, even in non-digitised areas. This is done 

by setting navigation points (“trace points”). 

A section of this type is called a trace.
Traces can be recorded in off-road mode while 

route guidance is active.

You can record and store up to 15 traces in 

the personal destination memory.

Traces are not stored in the list of previous 

destinations.

Summary of Contents for PCM3.1















































































































































































































Reviews:

No comments

Related manuals for PCM3.1

Panasonic CY-VHD9500U Instalation Manual preview
CY-VHD9500U
Brand: Panasonic Pages: 6
Panasonic CQVX100U - Car Audio - DVD Receiver Manual De Instrucciones preview
CQVX100U - Car Audio - DVD Receiver
Brand: Panasonic Pages: 46
Panasonic CQVW100U - Car Audio - In-Dash DVD Receiver Manual De Instrucciones preview
CQVW100U - Car Audio - In-Dash DVD Receiver
Brand: Panasonic Pages: 46
Panasonic CQ-VX220W Installation Instructions Manual preview
CQ-VX220W
Brand: Panasonic Pages: 20
Uniden GNS8431 Owner'S Manual preview
GNS8431
Brand: Uniden Pages: 76
XZENT X-127 User Manual preview
X-127
Brand: XZENT Pages: 55
Sound Storm SSV10.4F User Manual preview
SSV10.4F
Brand: Sound Storm Pages: 12
Grundig scd 5290 rds Service Manual preview
scd 5290 rds
Brand: Grundig Pages: 34
Tyco Fire Product Star Pulsar ESFR-25 Instruction Manual preview
Star Pulsar ESFR-25
Brand: Tyco Fire Product Pages: 4
Macrom M-OF7060 Update Procedure preview
M-OF7060
Brand: Macrom Pages: 5
Boss Audio Systems WFM Instruction Manual preview
WFM
Brand: Boss Audio Systems Pages: 4
Phonocar VM010 Instruction Manual preview
VM010
Brand: Phonocar Pages: 56
Panasonic CQ-VAD7300U Operating Instructions preview
CQ-VAD7300U
Brand: Panasonic Pages: 5
Panasonic CY-EM100U Operating Instructions preview
CY-EM100U
Brand: Panasonic Pages: 2
Panasonic CX-DVP292N Operating Instructions Manual preview
CX-DVP292N
Brand: Panasonic Pages: 21
Panasonic RM-1200 Service Manual preview
RM-1200
Brand: Panasonic Pages: 6
Panasonic CQ-RDP003N Installation Instructions preview
CQ-RDP003N
Brand: Panasonic Pages: 5
Panasonic CQ-RX450W Operating Insructions preview
CQ-RX450W
Brand: Panasonic Pages: 12

Brands by name

Popular brands

Load more brands