Porsche PCM3.1 Operating Manual Download

Page: 43 / 206

DISC

USB

You can connect a USB memory stick or a USB

MP3 player containing audio files to the USB inter-

face of the PCM in the centre console.

You can use it to:
– play audio data from your USB stick

(permitted formats: MP3, WAV, WMA and AAC-

LC),

– download data from the Sport display as well

– download data from the PCM logbook.



You cannot connect USB devices that require

the installation of special drivers. The use of a

USB hub is not permitted.



Compatibility with all memory sticks and MP3

players

cannot

be guaranteed due to the rap-

id rate at which USB media are developing.



USB devices with increased power require-

ments (e.g. external hard drives) cannot be

operated on the USB interface in some cir-

cumstances.



It is recommended not to leave USB devices

in the vehicle for long periods of time as ex-

treme ambient conditions (temperature, hu-

midity) can occur in vehicles.

Notes on the media supported

To avoid problems when playing your USB devic-

es, please note the following:
– Permissible media:

USB mass storage device,

USB MP3 player (to MTP standard)

– Permissible file systems:

USB devices with the file systems FAT 16 and

FAT 32 are supported.

– Permissible USB standards:

USB devices that meet the USB 2.0 specifica-

tions are supported.

– Permissible file structures:

Up to 10,000 tracks are supported on the USB

device.

USB jack

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands