Porsche PCM3.1 Operating Manual Download Page 74

Page: 74 / 206

PHONE

Accepting a call

As soon as a call comes in, an appropriate menu

is temporarily displayed or an appropriate mes-

sage shown in the bottom line.
If available, the telephone number and name of the

caller are displayed.
You can accept the incoming call in a number of

ways:

Pressing the Lift handset button

on the

PCM.

Selecting “

Answer

” on the display.

Selecting the menu item in the instrument clus-

ter using the lower right stalk on the steering

wheel.

(with multi-function steering wheel with

telephone function)

Pressing the Lift handset button

on the

multi-function steering wheel.

(with handset if available)

Pressing the Lift handset button

on the

handset.

Removing the handset from the charging cra-

dle.

Ending a call

You can end an active call by:

Pressing the End call button

on the PCM.

Selecting “

End call

” in the call menu.

Selecting the menu item in the instrument clus-

ter using the lower right stalk on the steering

wheel.

(with multi-function steering wheel with

telephone function)

Pressing the End call button

on the multi-

function steering wheel.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Brands by name

Popular brands