Porsche PCM3.1 Operating Manual Download Page 158

Page: 158 / 206

158

NAVI

Destination input using

geographical coordinates

If you know the geographical coordinates for a

destination, you can use them for destination in-

put.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Adv. destination input

”

> “

Geo. co-ordinates

”.

An input menu is opened.

Enter the geographical coordinates you want

and confirm by selecting “

”.

Select “

Start route guidance

”.

The route is calculated and route guidance

started.

Destination input using the map

You can use the map view for destination input as

an alternative to entering an address.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Adv. destination input

”

> “

Destination via map

”.

The map view is displayed.

Set the destination you want by touching the

map.

Open the detailed view by pressing the right ro-

tary knob

or touching the “

Details

” menu

in the header.

Select “

Start route guidance

”.

The route is calculated and route guidance

started.

Storing

This menu item allows you to store both a destina-

tion and your current position.



You can also access this function in the

menu in the map view.

Storing a destination

If route guidance is currently active, you can store

either the destination or the entire route depend-

ing on the type of route guidance in your personal

destination memory. The menu item provided here

is tailored to the respective situation.
The following options are available:
– “

Store destination

”

is displayed during route guidance to an ad-

dress, a geographical coordinate or a point of

interest.

– “

Store tour

”

is displayed during route guidance to a stopo-

ver or to the main destination in a tour.

– “

Store landmarks

”

is displayed when off-road navigation is active

when tracing a landmark navigation session.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Brands by name

Popular brands