Porsche PCM3.1 Operating Manual Download

Page: 12 / 206

Using the PCM

- Lift handset button

By pressing the Lift handset button

you can:

– accept an incoming telephone call or
– call up the quick dial function.

main menu button

Pressing the

button opens the menu for op-

erating the CD, DVD, iPod, USB, AUX and AUX BT

audio sources.

main menu button

Pressing the

button opens the menu for

radio mode.

Menu types and options for

operation

The PCM display is a colour touchscreen. All menu

functions, list entries and text input fields as well

as the arrow symbols and scrollbars can be oper-

ated by lightly touching the corresponding loca-

tion on the display.

What are the menu types?

Main menus

The range of functions of the PCM is divided be-

tween the following main menus:
–

: radio main menu,

–

: disc main menu,

–

: telephone main menu,

–

: navigation main menu,

–

: map view,

–

: sound settings,

–

: information menu as well as

–

: vehicle and trip data main menu.

Each of these main menus contains various sub-

menus for a specific topic.

Option menus

Each of the eight main menus has an option menu

where you find settings and other functions for the

respective main menu.

Calling up and operating menu types

Calling up main menus

To call up a main menu, press the appropriate

button below the display.

You can switch from one main menu to another at

any time.

When you return to a main menu, you return to the

function you were using before exiting the menu.

If you want to return to the top level of a main

menu, you must press the relevant main menu but-

ton twice in succession.

Calling up option menus

To call up an option menu, press the

button.

Touch the tab on the display with your finger.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands