Porsche PCM3.1 Operating Manual Download

Page: 47 / 206

DISC

External audio source

You can use the AUX interface to connect an exter-

nal audio source that is operated on the source it-

self rather than on the PCM. Please refer to the op-

erating manual for the relevant device.

Calling up an external audio source

Press the

button repeatedly until the

“

AUX

” audio source is highlighted in the bot-

tom line.

Activating the interface

To be able to select a connected external audio

source with the

button, the interface must

be activated in the SET menu.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

SET DISC / AUX

”.

You will only be able to access the “

SET DISC /

AUX

” menu if there is at least one CD/DVD in-

serted or at least one audio source activated

( ) in the menu.

Select “

AUX

” to activate ( ) or deactivate ( )

the function.

Adapting the volume for an external audio

source



Volume control should mainly be performed

on the external audio source to avoid large dif-

ferences in volume (particularly increases)

when changing the audio source.
Recommendation:

Set the maximum volume on the external

audio source.

Then set the volume you want on the PCM.

You can also adapt the volume of the external

audio source to the volume of the PCM.

AUX jack

WARNING!

Accident hazard.

Distraction could result in

you losing control of the vehicle.

Operate the external audio source only

when you are safely in control of your vehi-

cle and traffic conditions permit. If in doubt,

stop the vehicle and operate the external

audio source while the vehicle is parked.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands