Porsche PCM3.1 Operating Manual Download

Page: 172 / 206

172

Voice control

Please refer to the information on operation

and road safety on

page 6

The PCM is fully voice controllable (with the excep-

tion of the functions in the

and

menus as well as the various SET menus).
The voice control system is designed so that you

can generally say

each

menu item shown on the

display. Exceptions are indicated by an appropri-

ate message on the display of the PCM.
Voice control is activated by pressing the button

on the stalk for the direction indicators, high beam

and headlight flasher (please see also section “Ac-

tivating voice control” on page 175). This allows

you to operate the PCM without taking your hands

from the steering wheel.

How voice control works

The voice control system recognises commands

or numerical sequences regardless of the speak-

er. It provides acoustic feedback and guides you

through the functions.

Incorrect operation and cancelling a

dialogue

If you say an incorrect or unavailable command,

the voice control system responds with “Could you

repeat that?” and you can repeat the command.

After the 2nd failed attempt, the system offers as-

sistance; after the 3rd failed attempt, the PCM

aborts the operation and terminates the dialogue

with “End”.
You have the following options for terminating

voice control during a dialogue:

Say “cancel” when the voice control system is

expecting a command.

Say “End” when the voice control system is ex-

pecting a command.

Press any button on the PCM.

The PCM then executes the function corre-

sponding to the pressed button.

The only exception to this is the volume con-

trol. You can only use this button to adapt the

volume of the announcements, not to termi-

nate a dialogue.

Functions of the button on the stalk for

direction indicators, high beam and

headlight flasher

By pressing the button on the stalk for direction in-

dicators, high beam and headlight flasher you can:
– terminate a voice control announcement while

it is in progress,

– skip to the next part of the announcement in

the case of announcements with multiple

parts,

– cancel a dialogue manually.
The button has no function during a telephone call.

Speech intelligibility

To make it easier for your voice control system to

understand your commands, please note the fol-

lowing points:
– The hands-free microphone is directed to-

wards the driver’s seat. The voice control sys-

tem should therefore be operated by the driv-

er.

– Do not speak while your voice control system

is making an announcement.

– Speak without interruptions and at a normal

volume. Avoid long pauses and excessive em-

phasis.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands