Porsche PCM3.1 Operating Manual Download

Page: 99 / 206

PHONE

These security mechanisms require the PCM

to be authorised on your mobile phone. As

part of this, the telephone requests a “user ID”

and a “password” from the PCM. In order for

the PCM to gain access to the phonebook, it

must log into the telephone.

Since the PCM uses the fixed parameters

“UserID: PCM3” and “Pass: 0000” for this

permissible on your mobile phone.

Please refer to the operating instructions for

your mobile phone to find out whether these

settings are required on your mobile phone

and how to configure them.

Setting sorting

You can adapt the sorting of the phonebook and

call lists to the display on your mobile phone.
You have the following options for

sorting the

phonebook

– “

Standard

”

The phonebook is sorted by surname.

– “

Alternative

”

The phonebook is sorted by first name.

You have the following options for

sorting the

call lists

– “

Standard

”

The call lists are sorted in the same order in

which the entries were transferred from the

mobile phone.

– “

Alternative

”

The order of the entries transferred from the

mobile phone is reversed. This option supports

some mobile phones that transfer the oldest

entries first.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

SET PHONE

”

> “

Phonebook settings

”

> “

Sorting

”.

Setting sorting of the phonebook

Select “

Phonebook

”.

Select the sorting you want.

Setting sorting of the call lists

Select “

Call lists

”.

Select the sorting you want.

Setting automatic transfer of the

phonebook

If the “

Auto update

” function is activated, the

phonebook and the call lists of a mobile phone are

transferred as soon as the PCM is connected to

this mobile phone.

The data stored in the PCM is replaced by the cur-

rent phonebook and current call lists from the mo-

bile phone as soon as transfer is complete.

If the “

Auto update

” function is deactivated, the

data will no longer be updated.



This function is not supported by all mobile

phones.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

SET PHONE

”

> “

Phonebook settings

”.

Select “

Auto update

” to activate ( ) or

deactivate ( ) the function.



Your phonebook data can then only be ac-

cessed when the corresponding mobile phone

is connected to the PCM.

Summary of Contents for PCM3.1















































































































































































































Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands

Porsche PCM3.1, Operating Manual

Search results

Summary of Contents for PCM3.1

Reviews:

Related manuals for PCM3.1

Brands by name

Popular brands